[TR] TR3 O/D Solenoid plate

[Art McEwen]

Thanks!

Art

On Thu, Jul 15, 2021, 11:25 AM DAVID MASSEY <dave1massey at cs.com> wrote:

> Nothing will go sproing but you will likely loose your solenoid
> adjustment.  Not a big deal as adjusting is pretty simple.
>
> Dave
>
>
>
> -----Original Message-----
> From: Art McEwen <artwmcewen at gmail.com>
> To: triumphs at autox.team.net
> Sent: Thu, Jul 15, 2021 9:48 am
> Subject: [TR] TR3 O/D Solenoid plate
>
> It's weeping oil (even more than "acceptable"), can I loosen the 4 screws
> to add gasket goop without misaligning the plunger/spring thingy behind it
> or is it safe to remove entirely while in place without something going
> "sprong"?
>
> Thanks,
>
> Art
> TS64???LO
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20210715/0a8c2047/attachment.htm>