[TR] TR3 O/D Solenoid plate

[DAVID MASSEY]

 Not off hand but it should be listed in the ROM.  Those are 5/16 fasteners so it shouldn't take much.  10 Lb-Ft or so.
 
Dave 

 
 
-----Original Message-----
From: Art McEwen <artwmcewen at gmail.com>
To: DAVID MASSEY <dave1massey at cs.com>
Cc: triumphs at autox.team.net
Sent: Thu, Jul 15, 2021 3:35 pm
Subject: Re: [TR] TR3 O/D Solenoid plate

Btw any idea of the torque for the nuts/bolts on the solenoid plate?

On Jul 15, 2021, at 1:54 PM, Art McEwen <artwmcewen at gmail.com> wrote:



Thanks!

Art
On Thu, Jul 15, 2021, 11:25 AM DAVID MASSEY <dave1massey at cs.com> wrote:

 Nothing will go sproing but you will likely loose your solenoid adjustment.  Not a big deal as adjusting is pretty simple.
 
Dave 

 
 
-----Original Message-----
From: Art McEwen <artwmcewen at gmail.com>
To: triumphs at autox.team.net
Sent: Thu, Jul 15, 2021 9:48 am
Subject: [TR] TR3 O/D Solenoid plate

It's weeping oil (even more than "acceptable"), can I loosen the 4 screws to add gasket goop without misaligning the plunger/spring thingy behind it or is it safe to remove entirely while in place without something going "sprong"?

Thanks,
Art 
TS64???LO 
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20210715/38ab2170/attachment.htm>