[TR] TR3 O/D Solenoid plate

[DAVID MASSEY]

 Nothing will go sproing but you will likely loose your solenoid adjustment.  Not a big deal as adjusting is pretty simple.
 
Dave 

 
 
-----Original Message-----
From: Art McEwen <artwmcewen at gmail.com>
To: triumphs at autox.team.net
Sent: Thu, Jul 15, 2021 9:48 am
Subject: [TR] TR3 O/D Solenoid plate

It's weeping oil (even more than "acceptable"), can I loosen the 4 screws to add gasket goop without misaligning the plunger/spring thingy behind it or is it safe to remove entirely while in place without something going "sprong"?

Thanks,
Art 
TS64???LO 
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20210715/e59c0e56/attachment.htm>