[TR] Wheel bearing races
Tony Drews
tony at tonydrews.com
Fri Feb 26 18:52:40 MST 2021
The "how to get them out" posts seem to be spot on. A tip for driving
the new ones in - you can use the bench grinder on your old races to
make them slightly smaller diameter and use them (with other suitable
implements of destruction) to drive the new ones in.
On driving them out - many hubs have a little cutout in a couple of
spots to give you better access to the back side of the race. Not sure
about the TR hub, but clean all the grease out and look for those.
Cheers, Tony Drews
On 2/26/2021 4:59 PM, Jim Henningsen wrote:
> Ok, haven’t changed these out by myself before and want to learn to do it correctly. Redoing front suspension on myTR4a. Looking for recommendations on removing the front wheel bearing races so I don’t damage the hub. Same as a Tr6. Thought I’d ask our experts since I didn’t see a triumph post on YouTube and I don’t always trust YouTube.
> Jim Henningsen
> Ocala, fl
> 61 3
> 62 4
> 67 4a
> 75 6
> 81 8
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/tony@tonydrews.com
More information about the Triumphs
mailing list