[TR] Wheel bearing races

[John Linney]

I used aa rubber mallet and an old socket - forget the size, but is was one of my larger ones. I remember one of them I had to shake loose with a drift and hammer. Not that hard to get out unless someone Loctite'd them in.

> On Feb 26, 2021, at 2:59 PM, Jim Henningsen <trguy75 at gmail.com> wrote:
> 
> Ok, haven’t changed these out by myself before and want to learn to do it correctly.  Redoing front suspension on myTR4a.  Looking for recommendations on removing the front wheel bearing races so I don’t damage the hub.  Same as a Tr6.  Thought I’d ask our experts since I didn’t see a triumph post on YouTube and I don’t always trust YouTube.  
> Jim Henningsen
> Ocala, fl
> 61 3
> 62 4
> 67 4a
> 75 6
> 81 8
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/john@linneyweb.com