[TR] Inertia switch

[DAVID MASSEY]

 I used one from a Ford of some sort.  I mounted it next to the fuse block.  I figure that if it gets wet there I have bigger problems.
 
Dave 

 
 
-----Original Message-----
From: Chris Simo <ccsimonsen at gmail.com>
To: Jim Henningsen <trguy75 at gmail.com>; list Triumph <triumphs at autox.team.net>
Sent: Mon, Nov 16, 2020 4:26 pm
Subject: Re: [TR] Inertia switch

i went to the junkyard and pulled the inertia switches from some tauruses and sables. as I recall, 3 bucks each.
The rubber cover from the tr3 solenoid fits the reset button well if you mount outside the interior. I did that and sealed with silicone any other joints.
On Sun, Nov 15, 2020, 7:27 PM Jim Henningsen <trguy75 at gmail.com> wrote:

List,
Installing aftermarket Delphi electric fuel pump for low flow output on my 75 TR6 Diablo project car and thought I should install an inertia switch for safety measure.   Any recommendations on good aftermarket inertia switch?
Thanks
Jim Henningsen 
Ocala FL
Too many TRs
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/ccsimonsen@gmail.com

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20201117/98c2bfb1/attachment.htm>