[TR] Inertia switch

Chris Simo ccsimonsen at gmail.com
Mon Nov 16 15:26:58 MST 2020

i went to the junkyard and pulled the inertia switches from some tauruses
and sables. as I recall, 3 bucks each.

The rubber cover from the tr3 solenoid fits the reset button well if you
mount outside the interior. I did that and sealed with silicone any other

On Sun, Nov 15, 2020, 7:27 PM Jim Henningsen <trguy75 at gmail.com> wrote:

> List,
> Installing aftermarket Delphi electric fuel pump for low flow output on my
> 75 TR6 Diablo project car and thought I should install an inertia switch
> for safety measure.   Any recommendations on good aftermarket inertia
> switch?
> Thanks
> Jim Henningsen
> Ocala FL
> Too many TRs
> ** triumphs at autox.team.net **
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ccsimonsen@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20201116/0e113162/attachment.htm>

More information about the Triumphs mailing list