[TR] Inertia switch

[DAVID MASSEY]

 I used a switched I harvested from a car in the wrecking yard.  They're cheap and typically mounted inside the car somewhere so they hold up well.  Note orientation when you remove it so you can mount it the same way on your car.
 
Dave 

 
 
-----Original Message-----
From: Jim Henningsen <trguy75 at gmail.com>
To: TR3/6 <triumphs at autox.team.net>
Sent: Sun, Nov 15, 2020 6:23 pm
Subject: [TR] Inertia switch

List,
Installing aftermarket Delphi electric fuel pump for low flow output on my 75 TR6 Diablo project car and thought I should install an inertia switch for safety measure.  Any recommendations on good aftermarket inertia switch?
Thanks
Jim Henningsen 
Ocala FL
Too many TRs
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20201116/adaeeade/attachment.htm>