[TR] TR4 ignition switch

dave dave at ranteer.com
Sat Mar 21 13:28:03 MDT 2020

Yes, thank you.  I was quite fooled - I looked at the wiring diagram which
had 4 terminals, but there were clearly 6 wires coming off it.  I assumed
there were 6 separate terminals.  When I got it off I saw that there really
are just 4; that several of the terminals are dual.   Good to know I don't
have a FrankenSwitch!


From: Keith Stewart <keithstewart at bell.net> 
Sent: Saturday, March 21, 2020 2:17 PM
To: 'dave' <dave at ranteer.com>; triumphs at autox.team.net
Subject: RE: [TR] TR4 ignition switch


Looks like a TR4 switch to me. The switch may be Lucas, but the lock is
Wilmot Breedon and the FP674 identifies the key/lock combination. There
should be a little spring post toward the bottom of the lock, that when
depressed will allow the lock to slide out of the switch body. Comments that
I might make on the problem have already been made by others so I will not
repeat them.


Keith Stewart

keithstewart at bell.net <mailto:keithstewart at bell.net> 




From: dave <dave at ranteer.com <mailto:dave at ranteer.com> > 
Sent: March 20, 2020 9:28 PM
To: triumphs at autox.team.net <mailto:triumphs at autox.team.net> 
Subject: [TR] TR4 ignition switch


I'm not at all surprised - the ignition switch in my TR4 is not exactly
stock.  It might be a TR switch but ?????


Anyone recognize this switch?


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200321/5e022e69/attachment.htm>

More information about the Triumphs mailing list