[TR] How to tell the size of bolt or setscrew from the part number

[Keith Stewart]

These are some of those bolts that are "special in some way". Where do I find their part numbers in case I need to order more?



 

Keith Stewart

keithstewart at bell.net

 

 

 

-----Original Message-----
From: Chris Kantarjiev <cak at dimebank.com> 
Sent: June 17, 2020 4:49 PM

 

By default, it's grade 5 hardware. Bolts that have part numbers outside this system are special in some way - stronger, or have a shoulder, or an unusually threaded section. For example, the bolts that connect drive shaft flanges are not in this system (and I prefer to use AN hardware for them, but that's a different discussion).

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200618/e35b8efb/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 136235 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200618/e35b8efb/attachment.jpg>