[TR] Hoses to carbon canister for Triumphs similar to that used on a TR6

dave dave at ranteer.com
Wed Aug 26 11:25:38 MDT 2020


On a TR6 and your diagram – there is a T from the vacuum system.  One end goes to the cannister. Just eliminate it.

 

the line that comes in from the fuel tank is important in that is where air comes from to replace the fuel as it leaves the tank.  I just put a filter on it right there in the engine compartment and let it continue to supply air to the tank.

 

From: Sujit Roy <triumphstag at gmail.com> 
Sent: Wednesday, August 26, 2020 12:00 PM
To: dave <dave at ranteer.com>
Cc: Triumphs <triumphs at autox.team.net>
Subject: Re: [TR] Hoses to carbon canister for Triumphs similar to that used on a TR6

 

I am working on Stag No. 2 and need to get it registered in CA. I have all the parts, so I  thought I'd put it on. 

However, I have Stag no. 1. What improvements can I get by removing the canister and how do I plug the holes correctly? I recall the Stag has a return from this canister back into the fuel tank. If I plug this line wont it cause some sort or vacuum in the tank?

 

Sujit

 

On Wed, Aug 26, 2020 at 9:50 AM dave <dave at ranteer.com <mailto:dave at ranteer.com> > wrote:

Just a thought – why not remove the charcoal cannister and all the hoses?  I did that on my TR6 and its an improvement

 

From: Triumphs <triumphs-bounces at autox.team.net <mailto:triumphs-bounces at autox.team.net> > On Behalf Of Sujit Roy
Sent: Wednesday, August 26, 2020 11:41 AM
To: DAVID MASSEY <dave1massey at cs.com <mailto:dave1massey at cs.com> >
Cc: triumphs at autox.team.net <mailto:triumphs at autox.team.net> 
Subject: Re: [TR] Hoses to carbon canister for Triumphs similar to that used on a TR6

 

That's the back up plan. They don't look as nice though.

Regards.

 

On Wed, Aug 26, 2020 at 9:23 AM DAVID MASSEY <dave1massey at cs.com <mailto:dave1massey at cs.com> > wrote:

If you can't find it you can get some barbed right-angle fittings and make the sharp turns using those.

 

Dave 

 

 

-----Original Message-----
From: Sujit Roy <triumphstag at gmail.com <mailto:triumphstag at gmail.com> >
To: Triumphs <triumphs at autox.team.net <mailto:triumphs at autox.team.net> >
Sent: Wed, Aug 26, 2020 11:13 am
Subject: [TR] Hoses to carbon canister for Triumphs similar to that used on a TR6

I need to get some hoses for my Stag. I don't think they are available. 

This is from a TR6 and the hoses are similar to hoses 27 and 29.

The canister in the Stag sits quite high under the hood  and I'd like to get preformed 90 degree angled hoses. Are the hoses for the TR6 performed? If so, then TRF probably has the correct ones. Can someone confirm?

 

Regards, Sujit 

 

 

 






 

-- 

Sujit Roy
Cupertino, California


https://triumphstagblog.wordpress.com/

** triumphs at autox.team.net <mailto:triumphs at autox.team.net>  **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  <http://www.team.net/pipermail/triumphs> http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com




 

-- 

Sujit Roy
Cupertino, California


https://triumphstagblog.wordpress.com/

** triumphs at autox.team.net <mailto:triumphs at autox.team.net>  **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/triumphstag@gmail.com




 

-- 

Sujit Roy
Cupertino, California


https://triumphstagblog.wordpress.com/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200826/b5f16c21/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 37900 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200826/b5f16c21/attachment.jpg>


More information about the Triumphs mailing list