[TR] TR6 paint
John Macartney
John.Macartney at Ukpips.org.uk
Mon Oct 7 14:39:41 MDT 2019
If it helps you John, very few TRs of any type up to the end of the 6 ever left the factory with consistent panel gaps! If any did ever escape in such a condition, it was purely accidental.
Jonmac
Whenever I feel the need for exercise, experience has shown me it is better to lie down until the feeling goes away. WINSTON CHURCHILL
> On 7 Oct 2019, at 21:19, j t <jat1127 at hotmail.com> wrote:
>
> Listers,
>
> I recently did a bare metal refinish on my TR8 coupe. I had NOT intended to do so........started out as a touch up and then.........
>
> My pal has a water blasting system that mixes in a media. We used coal dust...aka Black Beauty. It completely stripped the car in a short two hours with NO panel warpage. Then it took 5 hours the next day with two orbital grinders using 220 grid to cut down the roughage caused by the BB. In twelve hours we had a very good result. Cost $100 a bag of BB x 3 bags.
>
> If one is going redo an older car I suggest this be considered.
>
> As for a TR frame I would get the shell off it and be sure it measures correctly. Then I would add various bracing. Then fit the body.
>
> Yes, getting the gaps is an art !
>
> CHEERS
> John Taylor
> 133 Barton RD
> Greenfield MA 01301 USA
>
> My Flickr Album
> Web site : johntaylor.photos
> Member - Brattleboro Camera Club
> Vermont Center for Photography
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/john.macartney@ukpips.org.uk
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20191007/ac8555b7/attachment.html>
More information about the Triumphs
mailing list