[TR] TR6 paint
j t
jat1127 at hotmail.com
Mon Oct 7 14:19:10 MDT 2019
Listers,
I recently did a bare metal refinish on my TR8 coupe. I had NOT intended to do so........started out as a touch up and then.........
My pal has a water blasting system that mixes in a media. We used coal dust...aka Black Beauty. It completely stripped the car in a short two hours with NO panel warpage. Then it took 5 hours the next day with two orbital grinders using 220 grid to cut down the roughage caused by the BB. In twelve hours we had a very good result. Cost $100 a bag of BB x 3 bags.
If one is going redo an older car I suggest this be considered.
As for a TR frame I would get the shell off it and be sure it measures correctly. Then I would add various bracing. Then fit the body.
Yes, getting the gaps is an art !
CHEERS
John Taylor
133 Barton RD
Greenfield MA 01301 USA
My Flickr Album<https://www.flickr.com/photos/taylored-photos>
Web site : johntaylor.photos
Member - Brattleboro Camera Club<http://brattleborocameraclub.com/>
Vermont Center for Photography
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20191007/c31e9279/attachment.html>
More information about the Triumphs
mailing list