[TR] Swapping ignition lock barrel to new switch

[Sujit Roy]

If this is any help. My the Stag there is a pin that is pressed in from the
side and holds the barrel in place. My locksmith drilled a small hole at an
angle next to the pin and was able to pull out the pin. The barrel came
out. .

On Wed, Mar 27, 2019, 4:06 PM Dave Connitt <dconnitt at fuse.net> wrote:

> Hi All,
>
> I had to buy a new ignition switch for my TR4A and after opening the
> switch box, I noticed that the lock barrel is not installed in the switch.
> That got me thinking about removing the lock barrel out of my bad switch
> and installing it my new one. And there is the problem.. Anyone know how to
> remove the lock barrel from my old switch and put it into my new switch?
>
> Thanks,
>
> Dave Connitt
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/triumphstag@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190327/4bcfc9a1/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 3386 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190327/4bcfc9a1/attachment.gif>