[TR] TR4 bypass hose question

[Jeff Scarbrough]

How about a marble stuffed in the hose?

On Fri, Apr 19, 2019, 2:14 PM Jim Henningsen <trguy75 at gmail.com> wrote:

> I would like to install a regular (non bellows) 160 degree thermostat in my
> 62 TR4.  I am hearing that to do so I need to block off the bypass hose.
> I'd like to keep the stock look of the bypass hose installed.  Is there a
> particular plug or bung that folks have used to insert into the bypass
> opening on the water pump housing or thermostat housing that is
> effective.
> Thanks in advance.
> Jim Henningsen
> Ocala, FL 34471
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/fishplate@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190419/a46ed998/attachment.html>