[TR] TR4 bypass hose question
Wbeech@flash.net
wbeech at flash.net
Fri Apr 19 17:34:14 MDT 2019
I think I used a 1/2” copper cap that is meant to used with rigid copper plumbing pipe.
Bill
Sent from my DynaTAC 8000X
On Apr 19, 2019, at 4:46 PM, Jeff Scarbrough <fishplate at gmail.com> wrote:
How about a marble stuffed in the hose?
> On Fri, Apr 19, 2019, 2:14 PM Jim Henningsen <trguy75 at gmail.com> wrote:
> I would like to install a regular (non bellows) 160 degree thermostat in my
> 62 TR4. I am hearing that to do so I need to block off the bypass hose.
> I'd like to keep the stock look of the bypass hose installed. Is there a
> particular plug or bung that folks have used to insert into the bypass
> opening on the water pump housing or thermostat housing that is effective.
> Thanks in advance.
> Jim Henningsen
> Ocala, FL 34471
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/fishplate@gmail.com
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190419/d72734f8/attachment.html>
More information about the Triumphs
mailing list