[TR] TR4 bypass hose question

[Jerry Van Vlack]

You really don't need to block it off but if you want to do so use a 1/2" 
piece of wooden dowel stuck in the hose.
I'm not in Florida but I run a 180 thermo and no block off in the by-pass 
hose.
JVV

-----Original Message----- 
From: Jim Henningsen
Sent: Friday, April 19, 2019 9:17 AM
To: Triumphs at autox.team.net
Subject: [TR] TR4 bypass hose question

I would like to install a regular (non bellows) 160 degree thermostat in my
62 TR4.  I am hearing that to do so I need to block off the bypass hose.
I'd like to keep the stock look of the bypass hose installed.  Is there a
particular plug or bung that folks have used to insert into the bypass
opening on the water pump housing or thermostat housing that is effective.
Thanks in advance.
Jim Henningsen
Ocala, FL 34471

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/jerryvv@roadrunner.com