[TR] I have gotten extra distributor dog shaft

[Paul Dorsey]

 Sounds like you need to get it in the right plane also is there a danger
if  The gear doesn’t mesh correctly and you could do damage? Also
Is it the edge of the distributor top did you mark for realignment purposes?

On Mon, Sep 10, 2018 at 6:00 AM Paul Tegler <ptegler at verizon.net> wrote:

> the only ' hard part' is getting your cam gear in  a the right clocking
> (timing) and engaging the oil pump shaft.
>
> take a little fiddling but is the right way to pre-oil before start up
>
> Mark the gear and note the alignment of the oil shaft slot prior to
> spinning it for reset and re-install.
>
> ptegler
>
> On 9/9/2018 4:34 PM, Paul Dorsey wrote:
>
> How hard would it be to take my distributor out and work the original oil
> pump? What are the steps were doing so? Thanks Paul Paul
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/ptegler@verizon.net
>
>
> --
> Paul Teglerptegler at verizon.net  www.teglerizer.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180910/f46221dd/attachment.html>