[TR] I have gotten extra distributor dog shaft
Paul Tegler
ptegler at verizon.net
Mon Sep 10 04:00:11 MDT 2018
the only ' hard part' is getting your cam gear in a the right clocking
(timing) and engaging the oil pump shaft.
take a little fiddling but is the right way to pre-oil before start up
Mark the gear and note the alignment of the oil shaft slot prior to
spinning it for reset and re-install.
ptegler
On 9/9/2018 4:34 PM, Paul Dorsey wrote:
> How hard would it be to take my distributor out and work the original
> oil pump? What are the steps were doing so? Thanks Paul Paul
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/ptegler@verizon.net
--
Paul Tegler
ptegler at verizon.net www.teglerizer.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180910/5f80d60d/attachment.html>
More information about the Triumphs
mailing list