[TR] 61 TR3A SU H6 Carb Issues

[ptegler at verizon.net]

pull out your oil damper psitons... the rods wedge down in the top of the pistons...pointed at each other.
when you throttle up you can easily see if the pistons are reacting together.
SLOW throttle changes are the key here... no damping means no enrichment on cracking the throttle open.

ptegler


-----Original Message-----
From: Jim Henningsen <trguy75 at gmail.com>
To: Peter Caldwell <peter at nosimport.com>
Cc: triumphs <triumphs at autox.team.net>
Sent: Thu, Oct 18, 2018 12:16 pm
Subject: Re: [TR] 61 TR3A SU H6 Carb Issues

I just got one of those kits.  How do you use the rods? I didn’t find a YouTube clip.  Thanks,
Jim Henningsen 

Sent from my iPad

> On Oct 17, 2018, at 11:13 AM, Peter Caldwell <peter at nosimport.com> wrote:
> 
> I do.  Best way to tell if the carbs and linkage are "balanced" at higher-than-idle revs.
> 
>    Peter C
> 
> Just wondering...  Q for the crowd at large.... does anyone still use  the little rods in the tops of their carbs for balancing?
>> 
>> (usually little kits with a jet wrench and etc)
>> 
>> v/r
>> 
>> ptegler
>> 
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/trguy75@gmail.com
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/ptegler@verizon.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20181018/750ca261/attachment.html>