[TR] cutoff tool

[Frank Fisher]

 i have not had good success with HF air tools.thier electric ones are great.i think it may be lack of close tolerance turbine that let too much air pass.





    On Monday, November 12, 2018, 12:26:55 PM PST, Wbeech at flash.net <wbeech at flash.net> wrote:  
 
 Dunabrade is an excellent brand, I have used their palm sanders for many trouble free years.  IMO too pricey for the few times I might need it, there is probably a HF solution for a lot less.  
Last restoration I used the Dremel cutoff wheel, sawsall, or hacksaw to cut rusted bolts.   I have considered the HF die grinder for my shop but not bought one as yet.  

NFI,Bill B
Sent from my Handspring Treo
On Nov 12, 2018, at 10:30 AM, dave <dave at ranteer.com> wrote:


I am looking at this tool: https://www.tooltopia.com/dynabrade-18075.aspx?utm_source=google&utm_medium=cpc&utm_campaign=paid_search_google_pla&adpos=1o2&scid=scplpDYB18075&sc_intid=DYB18075&gclid=CjwKCAiA5qTfBRAoEiwAwQy-6QkSL9Mhy0D-MUtAuTVMpZJUUMOkVmuDWgg0fQGXtN4dvjrspBKMXBoCScwQAvD_BwE

  

  

Anyone have a preferred tool for cutting off rusty bolts?  We are restoring a car that was outside too much.  Been using my grinding wheel and my Dremel, and have reached a point of frustration.  I run into this sort of thing periodically and have decided to just get the right tool.

  



  


** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20181112/787aa4b4/attachment.html>