[TR] Red LEDs?

Geo Hahn ahwahneetr at gmail.com
Wed May 2 07:55:26 MDT 2018


On Tue, May 1, 2018 at 3:04 PM, TERRY SMITH <terryrs at comcast.net> wrote:

> Tom and Dave, thank you.  Are you saying that you use a regular flasher
> unit with the ballast resistor, and that will allow not only the LED's to
> work, but also the turn signal indicator light on the dash?
>

That is what I did.  I used connectors to permit a no-cut connection to the
original harness.  Mounted magnets to the resistors so I could tuck them
out of the way (e.g. on the inner wing, under the apron):


Connects from a multiple bullet connector to any handy ground.

Geo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180502/665b96ec/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Load Resistors.JPG
Type: image/jpeg
Size: 53323 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180502/665b96ec/attachment.jpe>


More information about the Triumphs mailing list