[TR] [EXTERNAL] - Re: '3a ignition update and next

[David Templeton]

After all that cranking are the plugs wet?  If it is sucking on the tape it should be pulling fuel.
[DT] didn’t check the plug after being tapped, on the list now 😊


  1.  Best place to start with your carb setting is 1.5 turns(9 flats) from fully closed, that will get you running and you can adjust from there.

[DT] ah perfect


  1.  No need for any sealant around the intake manifold or carb mounting.  If your surfaces are clean and in good shape, gaskets are all you need.

[DT] even if they suck in starter fluif when carbs are tapped off?  They were clean when re-assembled….


  1.  Coil?  Try it but since it will run on the staring fluid it’s probably OK.  But maybe weak.

[DT] My thought is the weaker coil.  The spark light was blinking as expected but not very strong

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180730/c2ec436b/attachment.html>