[TR] TR4 question
Brian Kemp
bk13 at earthlink.net
Sat Jul 14 08:15:48 MDT 2018
Andrew,
If it is like the TR6 with rubber mounts (TR4 from CT20064?), see this
reference about installing the mounts:
https://vintagetriumphregister.org/tr6-steering-rack/
There was a factory tool, but I had good luck with directions like
these. Put the mounts on slightly loose, have a helper turn the
steering wheel to one extreme and hold it while you tighten the
compressed mount. Repeat in the other direction.
If you just put the mounts in and tighten them, it will be very sloppy.
I upgraded to poly mounts and liked the improvement.
When the car was restored, hopefully they replaced the tie rod ends. If
these are worn, that can be a related problem.
Brian
On 7/14/2018 6:42 AM, Andrew Uprichard wrote:
>
> TR4 owners: is there any adjustment on the R&P steering on a TR4? I
> have been driving the newly-restored car and I think there is a little
> too much slop in the steering.
>
> Any help would be great- thank you !
>
> Andrew
>
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/bk13@earthlink.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180714/678ff02b/attachment.html>
More information about the Triumphs
mailing list