[TR] Oil Pressure Gauge Line

[Ron Olds]

Everyone,

Thanks everyone for your inputs. I hadn't thought of replacing the line with a steel braided line. I will order one right away. My old plastic line broke right at the end of the ferrule. While I am at it I am going to replace the plastic clutch line with a steel braid line.

Does anyone have any suggestions to getting to the back of the gauge to connect the new line? This looks as if it will quite the job to get back there.

Ron Olds
72 TR6
50 MGTD

From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Ron Olds
Sent: Saturday, January 27, 2018 14:52
To: Triumphs (triumphs at autox.team.net) <triumphs at autox.team.net>
Subject: [TR] Oil Pressure Gauge Line

Everyone,

While trying to fix more issues on the car I found that I broke the oil pressure gauge line right at the fitting in the engine block. Does anyone know if I can repair the line. Is there a way to remove the broken piece of line off the fitting and securely installing the line back on the fitting?

Ron Olds
72 TR6
50 MGTD

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180128/af08b9fe/attachment.html>