[TR] TR6 Fuel Pump Rebuild

[Ron Olds]

Everyone,

Continuing on my TR6 fuel pump rebuild the kit came with two thin rubber washers and I do not know where they go.  They are about 15/16" od and ¼" id  Does anyone know where go? thanks for the help.

Ron Olds
72 TR6
50 MGTD

From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Ron Olds
Sent: Monday, January 1, 2018 14:09
To: Triumphs (triumphs at autox.team.net) <triumphs at autox.team.net>
Subject: [TR] TR6 Fuel Pump Rebuild

As part of my ongoing complete brake rebuilding process I found that the fuel pump (original style) is leaking so I am rebuilding it also. When putting the pump back together I found that the gasket for the bolt that holds the top cover on is too small for the bolt.  I tried to get it on the bolt but ruined it in the process.  It appears that this item is not available separately.  Does anyone have a suggestion of what I can use in place of this washer to seal around this bolt?  Also, should any type of sealer be used between the two pump halves and the diaphragm assembly?

Thanks for the help.

Ron Olds
72 TR6
50 MGTD

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180116/a1492a50/attachment.html>