[TR] Question on Fuel pumps TR3-4

[Doug Mathews]

Right on spot. I just took it out of the box and its just as you described.

Thanks again.

Doug


On 2/23/2018 2:46 PM, Keith Stewart wrote:
>
> The Canadian pumps I have seen do not have the priming lever, have the 
> top and bottom chambers attached via six shoulder washer like screws 
> (#1) rather than the original pan head screws. Also, the pin about 
> which the pump lever operates does not have ‘c’ clips to attach it (#2).
>
> Keith Stewart
>
> keithstewart at bell.net
>
> *From:*Doug Mathews [mailto:mathews at uga.edu]
> *Sent:* February 22, 2018 4:32 PM
> *To:* triumphs at autox.team.net
> *Subject:* Re: [TR] Question on Fuel pumps TR3-4
>
> Thanks for all the input.
>
> Given the age of the new ones I have (gosh knows how long ago I bought 
> them). Woulld there be any markins on them that would tell me if they 
> are AC or not. Says made in Canada. There is a stamping of "AC10") on 
> them.
>
> Just trying to figure out what I'm dealing with.
>
> Thanks
>
> Doug
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180223/1e0b9063/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 147997 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180223/1e0b9063/attachment.jpg>