[TR] DelTran question

[Randall]

You can find a description of the process in the owners manual from Deltran. Download it from
http://www.batterytender.com/manuals

-- Randall

On 15 December 2018 15:27:48 GMT-06:00, DAVID MASSEY <dave1massey at cs.com> wrote:
>That is typical for a battery tender.  A full-blown three-stage (or
>four-stage) smart charger will end up there at the end of its cycle.  A
>smart charger will start out in constant-current mode until the voltage
>reaches about 14.5 volts where it switches to constant voltage at that
>voltage until the current drops to a threshold level when it will drop
>back to 13.5 volts which is where your tender operates all the time. 
>The four-stage charger has a recovery mode for severely discharged
>batteries but behaves the same otherwise.
> 
>Dave 
>
> 
> 
>-----Original Message-----
>From: Bob Peglow <rpeglow at optonline.net>
>To: triumphs <triumphs at autox.team.net>
>Sent: Sat, Dec 15, 2018 1:13 pm
>Subject: [TR] DelTran question
>
>Hello,
>First time using a DelTran Battery tender on my TR6 (w/new battery).
>When light is on indicating a full charge the battery voltage shows at 
>13.45v.
>Is this unit operating as it should?
>Thank you.
>Bob
>
>
>** triumphs at autox.team.net **
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/pipermail/triumphs 
>http://www.team.net/archive
>
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20181215/89f4cbe8/attachment.html>