[TR] DelTran question

[DAVID MASSEY]

 That is typical for a battery tender.  A full-blown three-stage (or four-stage) smart charger will end up there at the end of its cycle.  A smart charger will start out in constant-current mode until the voltage reaches about 14.5 volts where it switches to constant voltage at that voltage until the current drops to a threshold level when it will drop back to 13.5 volts which is where your tender operates all the time.  The four-stage charger has a recovery mode for severely discharged batteries but behaves the same otherwise.
 
Dave 

 
 
-----Original Message-----
From: Bob Peglow <rpeglow at optonline.net>
To: triumphs <triumphs at autox.team.net>
Sent: Sat, Dec 15, 2018 1:13 pm
Subject: [TR] DelTran question

Hello,
First time using a DelTran Battery tender on my TR6 (w/new battery).
When light is on indicating a full charge the battery voltage shows at 
13.45v.
Is this unit operating as it should?
Thank you.
Bob


** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20181215/687c934d/attachment.html>