[TR] [NET] TR6 Washer Bottle Strap

[John Gibbs]

Hi Dave,
  I used a big wire tie and put it just under the rubber band so it's not that notable. Works great bottle don't move at all. You could also check at a craft store and see if they sell long double sided velcro strip for another alternative.
        Good luck and keep us posted 
                   John 

Sent from my iPhone

> On Aug 29, 2018, at 4:46 PM, David Friedlander via NET <net at newenglandtriumphs.org> wrote:
> 
> Hey all ~
> 
> I've got a pretty small, non-technical issue I'm hoping someone else has already figured 
> out:
> 
> Some years back, I put a new square washer bottle, bracket and strap on my '74 TR6. 
> I notice that the strap (which looks like an oversized rubber band, looks like it's about 
> to give way. Before that happens, I'd like to replace it: Not the bracket to which it's 
> attached, just the band. It seems that Moss sells the bracket and strap as an "assembly" 
> (P/N 546-140 @ $51.99) as does TRF (P/N 518265 @ $34.94). It seems obvious the 
> brackets don't wear out but the rubber retaining strap does. They don't seem to sell 
> the strap apart from the bracket but I'd prefer to find a strap (no, not a bungee cord) 
> at a considerably lower cost than the assembly pricing. Anyone BTDT?
> 
> Thanks in advance for any responses...
> 
> Dave Friedlander
> '74 TR6
> '59 TR3a in process
> _______________________________________________
> NET mailing list
> NET at newenglandtriumphs.org
> http://newenglandtriumphs.org/mailman/listinfo/net_newenglandtriumphs.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180829/f406f59b/attachment-0001.html>