[TR] Pilot bush TR3A

[Frank Fisher]

id find a buddy with a lath and just take a thou or 2 off


      From: James Henningsen <trguy75 at gmail.com>
 To: Frank Fisher <yellowtr3 at yahoo.com> 
Cc: TERRY SMITH <terryrs at comcast.net>; "triumphs at autox.team.net" <triumphs at autox.team.net>
 Sent: Saturday, November 25, 2017 1:23 PM
 Subject: Re: [TR] Pilot bush TR3A
   
Yes.  The flywheel is off and the bush is bigger than the flywheel opening so I believe you are correct.  It holds it in there.  Jim

Sent from my iPhone
On Nov 25, 2017, at 3:09 PM, Frank Fisher <yellowtr3 at yahoo.com> wrote:


if i recall, dont you have to take the flywheel off to get the bush in?and the flywheel stops it coming out?
frank

      From: TERRY SMITH <terryrs at comcast.net>
 To: James Henningsen <trguy75 at gmail.com>; triumphs at autox.team.net 
 Sent: Saturday, November 25, 2017 8:09 AM
 Subject: Re: [TR] Pilot bush TR3A
  
Hi, Jim.  I've had success putting the bush in the freezer for half hour, then installing after heating the flywheel with a little propane flame.  

Good luck!
Terry

On November 25, 2017 at 9:34 AM James Henningsen wrote:


My new pilot bush for crank does not fit in easily. I remember doing this in my TR6 motor and no issues. Is there a technique to use to get bush in without damaging opening or bush? 
Thanks 
Jim Henningsen
Ocala FL. 

Sent from my iPhone

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/terryrs@comcast.net


** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com


   


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171125/e90657b9/attachment.html>