[TR] Pilot bush TR3A

[James Henningsen]

Yes.  The flywheel is off and the bush is bigger than the flywheel opening so I believe you are correct.  It holds it in there.  Jim

Sent from my iPhone

> On Nov 25, 2017, at 3:09 PM, Frank Fisher <yellowtr3 at yahoo.com> wrote:
> 
> if i recall, dont you have to take the flywheel off to get the bush in?
> and the flywheel stops it coming out?
> 
> frank
> 
> 
> From: TERRY SMITH <terryrs at comcast.net>
> To: James Henningsen <trguy75 at gmail.com>; triumphs at autox.team.net 
> Sent: Saturday, November 25, 2017 8:09 AM
> Subject: Re: [TR] Pilot bush TR3A
> 
> Hi, Jim.  I've had success putting the bush in the freezer for half hour, then installing after heating the flywheel with a little propane flame.  
> 
> Good luck!
> Terry
> 
>> On November 25, 2017 at 9:34 AM James Henningsen wrote:
>> 
>> 
>> My new pilot bush for crank does not fit in easily. I remember doing this in my TR6 motor and no issues. Is there a technique to use to get bush in without damaging opening or bush? 
>> Thanks 
>> Jim Henningsen
>> Ocala FL. 
>> 
>> Sent from my iPhone
>> 
>> ** triumphs at autox.team.net **
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/terryrs@comcast.net
> 
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171125/867d3cac/attachment.html>