[TR] Pilot bush TR3A

[Frank Fisher]

if i recall, dont you have to take the flywheel off to get the bush in?and the flywheel stops it coming out?
frank

      From: TERRY SMITH <terryrs at comcast.net>
 To: James Henningsen <trguy75 at gmail.com>; triumphs at autox.team.net 
 Sent: Saturday, November 25, 2017 8:09 AM
 Subject: Re: [TR] Pilot bush TR3A
   
Hi, Jim.  I've had success putting the bush in the freezer for half hour, then installing after heating the flywheel with a little propane flame.  

Good luck!
Terry

On November 25, 2017 at 9:34 AM James Henningsen wrote:


My new pilot bush for crank does not fit in easily. I remember doing this in my TR6 motor and no issues. Is there a technique to use to get bush in without damaging opening or bush? 
Thanks 
Jim Henningsen
Ocala FL. 

Sent from my iPhone

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/terryrs@comcast.net


** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171125/99796c2e/attachment.html>