[TR] Pilot bush TR3A
TERRY SMITH
terryrs at comcast.net
Sat Nov 25 07:57:47 MST 2017
Hi, Jim. I've had success putting the bush in the freezer for half hour, then installing after heating the flywheel with a little propane flame.
Good luck!
Terry
> On November 25, 2017 at 9:34 AM James Henningsen wrote:
>
>
> My new pilot bush for crank does not fit in easily. I remember doing this in my TR6 motor and no issues. Is there a technique to use to get bush in without damaging opening or bush?
> Thanks
> Jim Henningsen
> Ocala FL.
>
> Sent from my iPhone
>
> ** triumphs at autox.team mailto:triumphs at autox.team .net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/terryrs@comcast.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171125/e8bdefa3/attachment.html>
More information about the Triumphs
mailing list