[TR] bearing puller

[Paul Tegler]

typically it it not advised to re-use these clips. So removal delicacy 
is not a requirement.

Those tools though are great for getting new ones down the shaft with 
minimal damage to clip and splines

Paul Tegler ptegler at verizon.net www.teglerizer.com

On 11/10/2017 8:22 AM, Jerry Van Vlack wrote:
> Dave and others:
> TRF and maybe others once sold the circlip tool (it’s not a bearing 
> but the circlip that needs the special tool). Photo of the tool is 
> attached. You might check your local club as someone may have one and 
> could remove that circlip for you. The Churchill Tool number might be 
> S-698, it’s hard to read on the tag. They sometimes come up on e Bay 
> but are getting hard to find. I was lucky to get mine from a retired  
> well known TR 4 racer who advertised it for sale, so maybe a racer 
> close by you would have one too. Maybe one of the British based TR 
> suppliers still sell them. It seems that I did see one advertised on a 
> web site of a Brit supplier.
> Best of luck, you can fight the clip off with several small flat blade 
> screwdrivers, usually takes a couple of tries and ruins cheap 
> screwdrivers in the process. I’ve done it.
> If the photo gets stripped send me an e-mail and I’ll send the photo 
> directly to you.
> JVV
> *From:* dave
> *Sent:* Thursday, November 09, 2017 8:21 PM
> *To:* triumphs at autox.team.net
> *Cc:* RedRiverTriumph at yahoogroups.com
> *Subject:* [TR] bearing puller
>
> The TR4 transmission has a bearing in the middle that requires a 
> special tool.
>
> Anyone have it?  Know where I can get it?
>
> Thanks!
>
> ------------------------------------------------------------------------
>
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/ptegler@verizon.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171110/7625e53e/attachment.html>