[TR] Re TR3 Rear pinion seal

[Robin Watson]

Subject: Re TR3 Rear pinion seal
I have just removed same on my 1960 TR3A, I used a piece of angle and while
drilling the two holes I took the time to drill two more on the other side
for tightening, also if anyone is replacing the Grease seal on the front
there is very little surface next to the felt to drive it in, I found that
a 2 1/8 hole saw with the teeth ground off fits perfect. I have not used
this list for very long and am not sure if pictures can be attached but I
will try. Robin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171110/a91dffbe/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DSCF3178.JPG
Type: image/jpeg
Size: 2773608 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171110/a91dffbe/attachment-0002.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DSCF3569.JPG
Type: image/jpeg
Size: 3944516 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171110/a91dffbe/attachment-0003.jpe>