[TR] flywheel bolts to reuse or renew

[Sujit Roy]

Hello Glenn,
You don't by any chance have an ARP  part no?

Regards, Sujit

On Wed, Nov 1, 2017 at 7:08 PM, Glenn Merrell <
controls at freelanceconsulting.net> wrote:

> Sujit,
> use new bolts, length IS CRITICAL.  Buy them from ARP in California. Use
> high strength sealant type locktight because they need to seal out crank
> side oil.
>
> Glenn, aka StagByTriumph
>
> *Glenn A. Merrell, CAP*
> *xcuz d speln erurs dis wsz typd on my Droid Turbo cell fone 😉*
> On Nov 1, 2017 4:06 PM, Sujit Roy <triumphstag at gmail.com> wrote:
>
> Have been told to get new flywheel bolts when replacing the flywheel . Can
> I use the same bolts and use locktite.  This is for a Stag
>
> Each bolt is about 10 UK pounds. Ouch.
>
> Sujit
>
> --
> Sujit Roy
> Cupertino, California
>
> https://triumphstagblog.wordpress.com/
>
>


-- 
Sujit Roy
Cupertino, California

https://triumphstagblog.wordpress.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171102/4730747f/attachment.html>