[TR] flywheel bolts to reuse or renew

[George Richardson]

You might try checking the part numbers against those for other Triumphs, particularly the TR7. I seem to recall using a lot of TR7 hardware when I restored my Stag years ago.

Sent from my Verizon 4G LTE Droid
On 1 Nov 2017 8:02 pm, CFMTR3A <cfmtr3a at verizon.net> wrote:
>
> For something integral and internal as the flywheel I would opt for new. 
>
> Have you checked other sources as that does seem to be a bit steep. McMasters-Carr or Fastenal might be options.
>
>
>
> On Wed, Nov 1, 2017 at 7:55 PM -0400, "Sujit Roy" <triumphstag at gmail.com> wrote:
>
>> Have been told to get new flywheel bolts when replacing the flywheel . Can I use the same bolts and use locktite. This is for a Stag
>>
>> Each bolt is about 10 UK pounds. Ouch.
>>
>> Sujit
>>
>> -- 
>> Sujit Roy
>> Cupertino, California
>>
>> https://triumphstagblog.wordpress.com/
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171101/822f816a/attachment.html>