[TR] clutch fork pin

[EDWARD WOODS]

Or, just rotate them to an undamaged surface...

>     On March 28, 2017 at 5:24 PM Allen Hess <allenhess at mgcarclub.com> wrote:
> 
>      
>     The throwout bearing pins are peened to the fork. Grind off the peened side, punch them out. Insert new ones and peen.
> 
>     Allen
>     From: Sujit Roy <triumphstag at gmail.com mailto:triumphstag at gmail.com >
>     Sent: Monday, March 27, 2017 4:07:27 PM
>     To: Cliff Hansen
>     Subject: Re: [TR] clutch fork pin
>      
>     the pins on the fork which hold the throwout bearing.
>     Sujit
> 
>     On Mon, Mar 27, 2017 at 3:55 PM, Cliff Hansen <cliff_hansen at outlook.com mailto:cliff_hansen at outlook.com > wrote:
> 
>         > > Do you mean the pins on the fork which hold the throwout bearing? Or the single pin which holds the fork to the shaft? If it's the latter (single pin) it's threaded, you don't need a press.
> > 
> >     > 


 

>     ** triumphs at autox.team.net **
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/archive
>     Forums: http://www.team.net/forums
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/fogbro1@comcast.net
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170328/b7a192b1/attachment.html>