[TR] clutch fork pin

[Allen Hess]

The throwout bearing pins are peened to the fork. Grind off the peened side, punch them out. Insert new ones and peen.

Allen
From: Sujit Roy <triumphstag at gmail.com>
Sent: Monday, March 27, 2017 4:07:27 PM
To: Cliff Hansen
Subject: Re: [TR] clutch fork pin
 
the pins on the fork which hold the throwout bearing.
Sujit

On Mon, Mar 27, 2017 at 3:55 PM, Cliff Hansen <cliff_hansen at outlook.com> wrote:
Do you mean the pins on the fork which hold the throwout bearing? Or the single pin which holds the fork to the shaft? If it's the latter (single pin) it's threaded, you don't need a press.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170328/b97d9878/attachment.html>