[TR] Removing gears off main shaft (gearbox)

[spitlist at cox.net]

Since you will want to replace the circlips anyway, it doesn't matter if you mangle them during removal.

Joe

---- glemon at neb.rr.com wrote: 
> If it is the same as I am thinking for TR6 I think the trick is to pry underneath with three flat blade screwdrivers and slide it off.  Some of the manuals and descriptions make it sound like a bear of a job, but I didn't think it was that bad, certainly some finesse and force in the right combo.
> 
> Greg Lemon
> TR250
> 
> ---- Sujit Roy <triumphstag at gmail.com> wrote: 
> > I'm looking at the ROM of the Stag and it says I need a special tool to
> > remove a circlip off the shaft.( Tool S67. )
> > 
> > I haven't looked at the shaft yet, but can I just remove with a think
> > bladed screw driver?
> > 
> > I'm assuming the TR6 has the same set up
> > 
> > 
> > Sujit
> > 
> > -- 
> > Sujit Roy
> > Cupertino, California
> > 
> > https://triumphstagblog.wordpress.com/
> 
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/spitlist@cox.net