[TR] fender bolts

[rbtr3a at cox.net]

Kroil. Is incredible stuff I use it all the time. 

Ronnie

> On Jul 17, 2017, at 3:05 PM, Don Hiscock <don.hiscock at gmail.com> wrote:
> 
> The product Bob refers to is Kroil, or Aerokroil.  Maybe a bit better than PB Blaster, and worlds better than WD-40 in breaking rusted fasteners free.  For tough ones I'll give weeks of soak time.
> http://www.kanolabs.com/
> 
>> On Mon, Jul 17, 2017 at 12:19 PM, Bob Labuz <yellowtr at adelphia.net> wrote:
>> Joe,
>> 
>> You might try heating with a torch and then using a candle and let the wax work in. I used this method to remove rusted studs from a TR6 exhaust manifold. You need to concentrate the heat on the nut if possible.
>> 
>> To remove broken studs, you can try to weld/braze a bolt and then use wax, wd40 or aerocrole (sp).
>> 
>> If you have a butterfly air wrench, set it to low torque and that may help some also.
>> 
>> Bob
>> 
>>> On 07/17/2017 01:04 PM, JOSEPH MATO wrote:
>>>   Has anyone come up with a foolproof way to get fender bolts off without snapping them. I would think heat from a torch would help along with soaking with WD40.  also, what do you use on the snapped head ones. thanks, Joe Mato
>> 
>> 
>> 
>> ** triumphs at autox.team.net **
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/don.hiscock@gmail.com
>> 
> 
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/rbtr3a@cox.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170717/5fc18d06/attachment.html>