[TR] fender bolts

[Don Hiscock]

The product Bob refers to is Kroil, or Aerokroil.  Maybe a bit better than
PB Blaster, and worlds better than WD-40 in breaking rusted fasteners
free.  For tough ones I'll give weeks of soak time.
http://www.kanolabs.com/

On Mon, Jul 17, 2017 at 12:19 PM, Bob Labuz <yellowtr at adelphia.net> wrote:

> Joe,
>
> You might try heating with a torch and then using a candle and let the wax
> work in. I used this method to remove rusted studs from a TR6 exhaust
> manifold. You need to concentrate the heat on the nut if possible.
>
> To remove broken studs, you can try to weld/braze a bolt and then use wax,
> wd40 or aerocrole (sp).
>
> If you have a butterfly air wrench, set it to low torque and that may help
> some also.
>
> Bob
>
> On 07/17/2017 01:04 PM, JOSEPH MATO wrote:
>
>   Has anyone come up with a foolproof way to get fender bolts off without
> snapping them. I would think heat from a torch would help along with
> soaking with WD40.  also, what do you use on the snapped head ones. thanks,
> Joe Mato
>
>
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/triumphs/don.hiscock at gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170717/d8142bdb/attachment.html>