[TR] fender bolts

[Bob Labuz]

Joe,

You might try heating with a torch and then using a candle and let the 
wax work in. I used this method to remove rusted studs from a TR6 
exhaust manifold. You need to concentrate the heat on the nut if possible.

To remove broken studs, you can try to weld/braze a bolt and then use 
wax, wd40 or aerocrole (sp).

If you have a butterfly air wrench, set it to low torque and that may 
help some also.

Bob

On 07/17/2017 01:04 PM, JOSEPH MATO wrote:
>   Has anyone come up with a foolproof way to get fender bolts off 
> without snapping them. I would think heat from a torch would help 
> along with soaking with WD40.  also, what do you use on the snapped 
> head ones. thanks, Joe Mato

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170717/c46ee195/attachment.html>