[TR] Trying to locate a gearbox top cover detent plug

[Sujit Roy]

Thanks.


On Mon, Jan 23, 2017 at 5:53 AM, Jeff Scarbrough <fishplate at gmail.com>
wrote:

> On Mon, Jan 23, 2017 at 1:59 AM, Randall <TR3driver at ca.rr.com> wrote:
> > But last time around, I went ahead and made some duplicates of the
> earlier
> > plugs, and tapped the holes for them.  The hole is just the right size to
> > tap for a UNF thread (sorry, again I forget the size offhand), and you
> can
> > cut all 3 plugs from a single bolt.  I used a Dremel and abrasive cutoff
> > wheel to grind a screwdriver slot into the top.
>
> I did the same thing...made from a 3/8" bolt, I think.  Easy-peasy,
> and made the detent adjustment a piece of cake.  Use a little Loctite
> to keep the plug at the correct setting.
>
> Jeff Scarbrough
> Corrosion Acres, Ga.
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/triumphs/triumphstag at gmail.com
>



-- 
Sujit Roy, Realtor
Cupertino, CA
(408) 839-8359
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170123/0226b15f/attachment.html>