[TR] Does a manual geatbox from a Stag share any components from other Triumphs?
Patrick Baize
pbaize at satx.rr.com
Tue Jan 3 12:04:49 MST 2017
Shares some stuff with triumph 2000 gear box. Cause I converted a TR
2000 to Stag and added OD.
On the overdrive ,replace all seals, you'll find they are hardened.
I've rebuilt 2 J types, work great.
Patrick
71 Stag
74 Spitfire
On 1/3/2017 12:00 PM, Sujit Roy wrote:
> Finally after many years of having a Triumph Stag's manual gearbox
> with J type over drive sitting in my parents shed in the UK, I was
> able to disassemble it as much as possible and bring it back to the US
> in two boxes weighing less that 20kg each and one hand bag weighing
> almost 10 Kg. Oddly enough the gear sector did resemble some sort of
> machine gun on the x ray machine.
>
> I am yet to take off the large bearing at the rear of the box to
> withdraw the shaft or the counter shaft.
>
> It looks like people are swapping out the carrier sleeve and replacing
> it with a longer one. Do other Triumphs share this?
>
> Does this gear box share gaskets and seal with other models?
>
> Should I change out the clutch release fork. I removed the bolt
> holding it on the shaft, but it is stuck any recommendations on
> getting this off?
>
> While the overdrive is in bits what should I look for?
>
>
> Sujit
>
>
>
>
>
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/pbaize@satx.rr.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170103/a2e708c9/attachment.html>
More information about the Triumphs
mailing list