[TR] Nissan R200 Differential

[Jerry Van Vlack]

I suggest you call Richard Good. I have found him to be very helpful with situations like this.
JVV

From: Harrymague at aol.com 
Sent: Monday, October 31, 2016 9:03 PM
To: triumphs at autox.team.net 
Subject: [TR] Nissan R200 Differential

Has anybody have a problem with Goodparts R200 differential installation with his upgraded axles??  Installing the left upgraded axle hits the frame and will not connect to the differential while I am trying to install it.  If I compress the spring, I can get it connected to the differential.   I have the upgraded springs.  I am installing this setup up on a new Tony Ratco frame.  I am concerned that when I release the spring, the axle will hit the frame or when driving, a bump that onloads the springs, the axle will hit the frame.  Are the upgraded springs longer then the standard springs?    Any thoughts will be greatly appreciated.
Thanks
Harry Mague


--------------------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20161101/39243ceb/attachment.html>