[TR] TR6 Bypass Valve Gasket

[Harrymague at aol.com]

Thanks Jack, that is my small problem, I don't know which of the three  
gaskets I should have.  I wonder if I had replaced them with the wrongs  ones 
some time ago.  I am having a idle problem and I think I have traced  it to 
the bypass valves.
Harry
 
 
In a message dated 7/17/2016 11:23:06 A.M. Eastern Daylight Time,  
McGaheyRx at aol.com writes:

The 3 gaskets on the right, in the picture, are all for placement between  
the bypass valve and the carb body - of course, you only use 1 of those 3 -  
which one of those 3 you use depends on which version of the bypass valve 
you  have.


The 2 gaskets with the bigger hole in the middle go  above and below the 
valve diaphragm.


Hope this helps.


Cheers,
Jack Mc

Sent from my iPad

On Jul 17, 2016, at 8:41 AM, Geo Hahn <_ahwahneetr at gmail.com_ 
(mailto:ahwahneetr at gmail.com) >  wrote:




 
Harry -


I'm not sure - but perhaps it is in this picture?



http://xks.com/images/F65034573.png


Geo








On Sat, Jul 16, 2016 at 6:18 PM, <_Harrymague at aol.com_ 
(mailto:Harrymague at aol.com) > wrote:


Does anybody have a picture of the correct gasket that goes between  the 
bypass valve and the body of the ZS175-CD carb body??
Thanks in advance.
Harry Mague



** _triumphs at autox.team.net_ (mailto:triumphs at autox.team.net)   **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com









** _triumphs at autox.team.net_ (mailto:triumphs at autox.team.net)   **

Donate: http://www.team.net/donate.html
Archive:  http://www.team.net/archive
Forums:  http://www.team.net/forums
Unsubscribe/Manage:  
http://autox.team.net/mailman/options/triumphs/mcgaheyrx@aol.com


=
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20160717/ef5a9e43/attachment.html>