[TR] TR6 Bypass Valve Gasket

[Geo Hahn]

Harry -

There's some useful info.

If you can figure out which gasket you need in that photo I will take a
look and see if I have it here.

By the numbers...


Geo
​
​

Geo

On Sun, Jul 17, 2016 at 8:22 AM, Jack Mc <McGaheyRx at aol.com> wrote:

> The 3 gaskets on the right, in the picture, are all for placement between
> the bypass valve and the carb body - of course, you only use 1 of those 3 -
> which one of those 3 you use depends on which version of the bypass valve
> you have.
>
> The 2 gaskets with the bigger hole in the middle go above and below the
> valve diaphragm.
>
> Hope this helps.
>
> Cheers,
> Jack Mc
>
> Sent from my iPad
>
> On Jul 17, 2016, at 8:41 AM, Geo Hahn <ahwahneetr at gmail.com> wrote:
>
> Harry -
>
> I'm not sure - but perhaps it is in this picture?
>
> http://xks.com/images/F65034573.png
>
> Geo
>
>
>
>
> On Sat, Jul 16, 2016 at 6:18 PM, <Harrymague at aol.com> wrote:
>
>> Does anybody have a picture of the correct gasket that goes between the
>> bypass valve and the body of the ZS175-CD carb body??
>> Thanks in advance.
>> Harry Mague
>>
>>
>> ** triumphs at autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com
>>
>>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/mcgaheyrx@aol.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20160717/9f19e465/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Bypass Gaskets 2.JPG
Type: image/jpeg
Size: 66884 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20160717/9f19e465/attachment.jpe>