[TR] TR6 Bypass Valve Gasket
McGaheyRx at aol.com
Sun Jul 17 09:22:57 MDT 2016
The 3 gaskets on the right, in the picture, are all for placement between the bypass valve and the carb body - of course, you only use 1 of those 3 - which one of those 3 you use depends on which version of the bypass valve you have.
The 2 gaskets with the bigger hole in the middle go above and below the valve diaphragm.
Hope this helps.
Sent from my iPad
> On Jul 17, 2016, at 8:41 AM, Geo Hahn <ahwahneetr at gmail.com> wrote:
> Harry -
> I'm not sure - but perhaps it is in this picture?
>> On Sat, Jul 16, 2016 at 6:18 PM, <Harrymague at aol.com> wrote:
>> Does anybody have a picture of the correct gasket that goes between the bypass valve and the body of the ZS175-CD carb body??
>> Thanks in advance.
>> Harry Mague
>> ** triumphs at autox.team.net **
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://email@example.com
> ** triumphs at autox.team.net **
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://firstname.lastname@example.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Triumphs